contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968


Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851


您的位置: 首页 - 公司动态 - 激光设备知识 Fiber laser cutting machine has many points to pay attention to in the process of useYour position: 杏鑫平台 - Company News - Laser Equipment Knowledge

There are many points to pay attention to during the use of fiber laser cutting machine

Release time: 2014.07.30 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:

There are many points to pay attention to in the process of using the fiber laser cutting machine . The following five excerpts are used to share with you. I hope it will be of great help to everyone when using the fiber laser cutting machine .

1) The dual focal length laser cutting head is a fragile item on the laser cutting machine . Long-term use will cause damage to the laser cutting head.

2) Check the straightness of the fiber laser cutting machine track and the verticality of the machine every six months, and find that it is abnormal to maintain and debug in time. Without this, the effect of cutting may not be very good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.

3) Use a vacuum cleaner once a week to remove dust and dirt from the machine. All electrical cabinets should be closed and dustproof.

4) Always check the steel strip of the fiber laser cutting machine to ensure that it is tight. Otherwise, if something goes wrong during operation, people may be injured, and death may be caused seriously. The steel belt looks like a small thing, and the problem is still a little serious.

5) The guide rails of the fiber laser cutting machine should be cleaned frequently to eliminate dust and other debris, to ensure that the normal rack of the equipment is to be wiped frequently, and lubricated to ensure lubrication without debris. The guide rail must be cleaned and lubricated frequently, and the motor must also be cleaned and lubricated frequently. The machine can move better during cutting, more accurate cutting, and the quality of the cut product will be improved .

The above five points of use skills are summarized bit by bit in actual use, and have high operability. Of course, there is still a certain difference between Ranhe skills and the actual situation. When using it, you must also take into account the actual situation, and everything is based on reality.

This article is divided into 1 pages
share to:
Previous: The main difference between laser tube cutting machine marking machine glass tube and RF tube
Next: How to choose a metal laser cutting machine suitable for the company's own needs
related articles: