contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968

0769-21661919

Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851

E-mail: info@afeweb.com

您的位置: 首页 - 公司动态 - 行业新闻 When the metal laser cutting machine is in use, the cutting head will walk according to the set cutting trajectory Your location: 杏鑫平台 - Company News - Industry News

When the metal laser cutting machine is in use, the cutting head will walk according to the set cutting trajectory

Release time: 2014.07.31 News source: Views:

When the metal laser cutting machine is in use, the cutting head will walk according to the set cutting trajectory. However, in the case of different materials, different thicknesses, and different cutting methods, the height of the laser cutting head needs to be adjusted and controlled. The distance between the cutting nozzle and the surface of the workpiece to be cut One of the main factors that determines the quality and speed of the cut. In addition to selecting the appropriate cutting nozzle model and air pressure parameters according to the cutting situation, the metal laser cutting machine needs to increase or decrease the height between the cutting head and the steel plate according to the thickness of the cutting material. Steel plates of different thicknesses use different parameters. At the same time, the cutting mouth should be adjusted corresponding height.

During the use of the metal laser cutting machine , in order to ensure a high quality incision, the height of the cutting nozzle to the surface of the workpiece to be cut must be kept substantially the same. Due to the fast speed of the laser cutting machine , the operator cannot see the operation mode by hand, and the response speed cannot be achieved. Especially when cutting thin plates, or the surface of the material is textured, the flatness is not high, or the cutting processing environment is limited, it is important to keep the cutting height stable. In order to compensate for the instability of height control when manually adjusting the cutting, the metal laser cutting machine is equipped with an imported follower capacitor height adjuster. No matter how thick the board is, the height can be kept the same with the capacitive height-adjusting follow-up cutting head. The principle of increasing the capacitance is that the capacitance between the two induction plates and the steel plate to be cut forms a capacitance between the two plates, and the capacitance is related to the distance between the two.

This article is divided into 1 pages
share to:
Previous: How to choose a metal laser cutting machine suitable for the company's own needs
Next: Analysis of clothing laser cutting machine cutting machine
related articles:
    No Information