contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968


Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851


您的位置: 首页 - 公司动态 - 激光设备知识 How to correctly use fiber laser marking machine to effectively extend the life of your location : 杏鑫平台 - Company News - Laser Equipment Knowledge

How to correctly use the fiber laser marking machine to effectively extend the life

Release time: 2014.08.14 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:
How to correctly use fiber laser marking machine to effectively extend its life. In recent years, fiber laser marking machine has gradually stood out in the market due to its high stability, long service life, wide application, and good marking effect. The fiber laser marking machine is expensive to build, and special attention should be paid to maintenance in daily production.

(1) Do not touch the beam when the light pen of the laser marking machine is in operation;

(2) The laser is the core of a laser marking machine . It must be moved carefully to avoid being broken due to improper movement;

(3) In operation, if a fault is found, it must be stopped immediately to avoid causing casualties;

(4) Do not start the laser marking machine when the water circulation is improper;

(5) When preparing to turn off the marking machine, the current must be set to about 5A;

(6) During work, the working area should be higher than the operating area;

(7) After using the device for a period of time, you need to wipe the dust on the surface with a clean, dry cloth;

(8) The field lens will become blurred or dusty over time. Use a clean absorbent cotton dipped in alcohol to gently wipe the lower surface of the lens until there is no dirt on the surface of the lens.

(9) After the equipment is stopped for half an hour, clean up the items and residues on the work area. Cover the equipment with a clean cloth to prevent dust from entering the equipment.
This article is divided into 1 pages
share to:
Previous: Laser engraving machine can realize partial or full one-time output laser power
Next: Choosing the right laser chiller for the laser marking machine can greatly improve the life and processing precision of the laser marking machine
related articles:
    No Information