contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968

0769-21661919

Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851

E-mail: info@afeweb.com

您的位置: 首页 - 公司动态 - 激光设备知识 The adjustment of the optical path of the cloth laser cutting machine requires careful patience and earnestness. You are here: 杏鑫平台 - Company News - Laser Equipment Knowledge

The adjustment of the light path of the cloth laser cutting machine requires careful patience and seriousness

Release time: 2014.08.14 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:
The adjustment of the optical path of the cloth laser cutting machine requires careful patience and seriousness. If the laser has a laser at a dozen amps, but the laser power is weak, you can adjust it slightly according to the following methods: 1. Sleep the laser power supply. The status is canceled. Turn off the power of the Q driver. 2. Use a frequency doubler to check the quality of the laser beam. If the laser is dark at 14A, carefully adjust the four knobs on the front and rear reflector frames to make the diameter of the light spot the brightest and roundest. 3. Gradually reduce the output current of the laser power supply until 10A. Continue to carefully adjust the four knobs on the front and rear reflector frames to make the diameter of the light spot the brightest and roundest, and the adjustment of the light path is complete. Note for adjusting the laser path of the cloth laser cutting machine : 1. Do not turn a knob too large or too fast, otherwise it is easy to have no laser. Do not loosen the hexagon socket screws on the front and rear mirror frames at one time, otherwise it is easy to have no laser. 2. The device has a light path locking device, please lock it immediately after the light path is adjusted to prevent the light path from being incorrect.
This article is divided into 1 pages
share to:
Previous: Choosing the right laser chiller for the laser marking machine can greatly improve the life and processing precision of the laser marking machine
Next post: Love Heli Laser Colleague Xiaofu-For this we pray in silence with you
related articles:
    No Information