contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968

0769-21661919

Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851

E-mail: info@afeweb.com

您的位置: 首页 - 公司动态 - 公司新闻 Metal laser cutting machine In order to make up for the problem of unstable height control during manual adjustment cutting Your position: 杏鑫平台 - Company News - Company News

Metal laser cutting machine in order to make up for the problem of unstable height control during manual adjustment cutting

Release time: 2014.09.16 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:
In order to compensate for the instability of height control when manually adjusting the cutting, the metal laser cutting machine is equipped with an imported follower capacitor height adjuster. No matter how thick the board is, the height can be kept the same with the capacitive height-adjusting follow-up cutting head. When the metal laser cutting machine is in use, the cutting head will walk according to the set cutting trajectory, but under different materials, different thicknesses, and different cutting methods, the height of the laser cutting head needs to be adjusted and controlled, and the distance between the cutting nozzle and the surface of the workpiece One of the main factors that determines the quality and speed of the cut. In addition to selecting the appropriate cutting nozzle model and air pressure parameters according to the cutting situation, the metal laser cutting machine needs to increase or decrease the height between the cutting head and the steel plate according to the thickness of the cutting material. Steel plates of different thicknesses use different parameters. At the same time, the cutting mouth should be adjusted corresponding height. During the use of the metal laser cutting machine , in order to ensure a high-quality incision, the height of the cutting nozzle to the surface of the workpiece to be cut must be kept substantially the same. Due to the fast speed of the laser cutting machine , the operator cannot see the operation mode by hand, and the response speed cannot be achieved. Especially when cutting thin plates, or the surface of the material is textured, the flatness is not high, or the cutting processing environment is limited, it is important to keep the cutting height stable.
This article is divided into 1 pages
share to:
Previous: The application of laser cutting in the kitchenware industry
Next: Whether it is laser marking machine hot processing technology or cold processing technology, it is processing the surface of the material
related articles:
    No Information