Anshan Heli Laser Equipment Co., Ltd.
National Service Hotline : 400-641-6888
Address: No. 368 Qianshan Road, High-tech Zone, Anshan City
Dongguan Heli Laser Equipment Co., Ltd.
Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province
Contact: Mr. Yang
1. The aging or defect of the B axis also affects the laser power output.
2. The mirror of the laser cannot be detached without the tool for special alignment of the optical path (the position of the five mirrors). If the reflector is not removed before the glass tube is replaced, the power should be able to go up after the glass tube is replaced.
3. There is a large difference between the pressure inside the glass tube and the pressure outside the glass tube. If there is a pressure difference between the inside of the glass tube and the outside of the glass tube, the filling pressure inside the tube can be set the same as the outside of the tube to reduce the possibility of a pressure difference.
4. The air humidity is too high. If water droplets are found on the generator cover, and there are watermark marks on the wall of the cracked glass tube. You can add high-power air conditioners and air dryers to reduce air humidity; high-temperature air with high humidity may also cause the glass to crack.
| Previous: Wuhan will become a global gathering place for laser technology innovation and industrial development in 2020 |
Next: Circulating water plays a key role in metal laser cutting machine