contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968


Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851


您的位置: 首页 - 公司动态 - 激光设备知识 Three methods of laser cutting machine cleaning and maintenanceYour position: 杏鑫平台 - Company News - Laser Equipment Knowledge

Three methods of cleaning and maintenance of laser cutting machine

Release time: 2014.10.10 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:

First, the cleaning method of the laser cutting machine operation table: the operation table has zinc iron alloy, honeycomb, crawler, blade and other workbenches, first clean up the processing debris on the workbench, the crawler workbench requires half a year to add a little clear Anti-rust oil, do anti-rust treatment, other workbenches are not needed. (Note that the work platform cannot be easily cleaned with water, and it is easy to rust the work table to accelerate the work oxidation.

Second, the method of cleaning the guide rail of the laser cutting machine : first remove the dirt and processing debris on the guide rail, and then add a little clean lubricant on the guide rail, and move the guide rail to make the clean lubricant evenly distributed on the guide rail. (Be careful not to have thick lubricating oil (butter). This kind of lubricating oil is easily attached to the guide rail, which can easily cause the twisting of processing debris and dust, and even damage the slider and the guide rail).

Third, pay attention to cleaning the lens and guide rail of the laser cutting machine every day, and clean up the sundries on the workbench. Let's take a look at the cleaning method of the lens: When cleaning the lens, you must use absolute ethanol or 98% alcohol as the cleaning solution. After rubbing alcohol, gently scrub the lens in the direction, and finally wipe it with dry cotton to make the lens bright and transparent; (note that the scrubbing is too easy to wipe off the coating on the lens to damage the lens)

1. The higher the precision of the table, the higher the precision of cutting.

2. The material of the workpiece has certain influence on the laser cutting accuracy.

3. The larger the thickness of the workpiece, the lower the accuracy and the larger the slit.

4.Focus size of the laser beam after focusing

5. The positioning accuracy of the table determines the repeat accuracy of the cutting.

6. Under the same conditions, stainless steel has a higher cutting accuracy and a smoother cutting surface.

7. Because the laser beam is tapered, the slit is also tapered. The thickness of 0.3MM stainless steel is much smaller than that of 2MM.

8. The spot after the laser beam is focused is also sharp, the higher the cutting accuracy, especially the smaller the slit, the smallest the spot can reach 0.01M, so when you need high-precision cutting, you can choose a short focal length lens.

Laser cutting machine , laser engraving machine , laser marking machine , laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd.
This article is divided into 1 pages
share to:
Previous: Alibaba listing detonates e-commerce laser companies More and more companies expect to achieve marketing via the Internet
Next: The components of the self-floating laser cutting head of metal laser cutting machine
related articles:
    No Information