contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968


Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851


您的位置: 首页 - 公司动态 - 激光设备知识 Laser engraving machine keyboard keys combine bamboo with wireless keyboard mouse etc. Your location: 杏鑫平台 - Company News - Laser Equipment Knowledge

Laser engraving machine keyboard keys combine bamboo with wireless keyboard mouse

Release time: 2014.10.24 News source: Laser cutting machine, laser engraving machine, laser marking machine, laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd.

The combination of ecology and technology, environmental protection is healthier, and then complement each other with Chinese culture, it is even more attractive. The concept of health and environmental protection has always been an integral part of Chinese traditional culture, and it is still in use today. As a running technology that respects traditional culture, it has always been at the forefront of combining technology and culture, and innovation and creativity are endless. Combining bamboo with a wireless keyboard and mouse, our technology life returns to nature, and culture and technology coexist.
Laser engraving technology: Wooden wireless keyboard and mouse set Benbu KG308 + MG93 wireless keyboard and mouse set differs from traditional keyboards not only in terms of materials and features, but the keyboard provides 116 keys, which is based on the crater architecture key technology Support ergonomic design. The feel has kept the usual level of running and has a quiet design, and it will not disturb others at night. And input is more efficient and faster.
The most important thing is that the keyboard keys use laser engraving technology, which has a long service life and will not cause the writing to be blurred due to long-term use. Whether it's a keyboard or a mouse, the colors, edges, and polished upper panel exude a natural and fresh vitality, with a high degree of uniformity.
Brief analysis of laser engraving processing Laser engraving processing is based on numerical control technology, and laser is the processing medium. The physical melting of the processed material under laser irradiation and the physical degeneration of the gas instantly achieve the purpose of processing. With the rapid development of optoelectronic technology, the application of laser engraving technology has become more and more extensive, and the requirements for engraving accuracy have become higher and higher. The four most fundamental factors affecting laser engraving are: engraving speed, laser power, engraving accuracy, and materials. To achieve a certain engraving effect on a specific material, it is required to absorb a laser with a certain energy. This energy should be regarded as the laser energy absorbed by the material = laser power / engraving speed. Simply put, to increase the laser energy absorbed by the material, you should increase the laser power or reduce the engraving speed. As to which method to use in the end depends on the material and the final engraving effect. Generally speaking, users avoid high and low speeds, because that will reduce production efficiency. In fact, it is not only the engraving speed that affects the engraving efficiency, but the engraving accuracy also has a great influence on it.
The engraving speed is very fast, usually expressed in IPS (inches per second). High speed brings high productivity. Speed is also used to control the depth of the cut. For a specific laser intensity, the slower the speed, the greater the depth of the cut or engraving. Of course, you can also use the engraving machine panel to adjust the speed, or you can use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%.
For a specific engraving speed, the greater the intensity, the greater the depth of the cut or engraving. The intensity can be adjusted using the panel of the engraving machine, or it can be adjusted using the computer's print driver. In the range of 1% to 100%, the adjustment is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper.
The spot size of the laser beam can be adjusted using lenses with different focal lengths. Small spot lenses are used for high-resolution engraving. Large spot lenses are used for lower resolution engraving, but for vector cutting it is the best choice. The new equipment comes standard with a 2.0-inch lens. Its spot size is in the middle, which is suitable for various occasions.
Wood is by far the most commonly used laser-machined material and is easily carved and cut. Light-colored wood like birch, cherry or maple can be laser-gasified well and is therefore more suitable for carving. Each kind of wood has its own characteristics, and some are denser, such as hardwood, which requires greater laser power when carving or cutting. Laser engraving machines generally do not cut wood to a depth of less than 5mm. This is because the power of the laser is relatively small. If the cutting speed is slow, the wood will burn. After wood carving, there will generally be a feeling of being burned, and it has an original artistic beauty to match the wood background. The depth of the color mainly depends on the laser power and carving speed.
Laser cutting machine , laser engraving machine , laser marking machine , laser equipment brand manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Summary Some time ago, the IT man turned the waste optical drive into a laser engraving machine . It can be seen that the cost of laser engraving will not be high. Laser engraving wood is the most common laser teaching material, and the wooden laser keyboard is environmentally friendly, suitable for low cost, and worth the experience.
This article is divided into 1 pages
share to:
Previous: Laser processing has a lot of room for exhibition in Changsha Industrial Robot Industry Demonstration Park
Next: The sales scale of China's small and medium power laser cutting equipment market may reach 1.6 billion yuan
related articles:
    No Information