contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968

0769-21661919

Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851

E-mail: info@afeweb.com

您的位置: 首页 - 公司动态 - 激光设备知识 Glass carving art laser engraving machine to complete your location: 杏鑫平台 - Company News - Laser Equipment Knowledge

Glass carving art laser engraving machine to complete

Release time: 2015.05.15 News source: Laser cutting machine | Laser marking machine | Laser engraving machine | Fiber laser marking machine | Laser equipment manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:
Lasers can be engraved on the glass surface, but the depth of the engraving cannot be cut. Under normal circumstances, the laser can form frosting or breaking effects on the glass surface. The general laser engraving glass technology is used on laser engraving art glass. By pasting a layer of sticker on the glass, the laser engraving machine directly prints the imprint on the sticker, so that the laser imprint can be directly coated . Compared with traditional art glass production, the application of laser engraving machine technology on glass can save time and production costs to a large extent. This is a laser engraving machine designed and manufactured by our company for the art glass industry.



Under normal circumstances, users want to get frost instead of shattering effect. This depends on the texture of the glass and the consistency of the hardness. Glass engraving is usually difficult to control. You can make a smooth matte surface according to the following steps: apply a little cleansing to the area to be carved, load a piece of 杏鑫平台paper or napkin that is slightly larger than the area to be carved, and use water to Soak the paper completely and squeeze the excess water from the area. Put the wet paper on the engraving area to spread it out without wrinkles. Put the glass in the laser engraving machine , engraving while the paper is still wet, then remove the glass, remove the remaining paper, and then clean the glass surface. If necessary, lightly polish the glass surface with 3M Scotch Brite. Under normal circumstances, the laser power setting should be a little water, the accuracy is set to 300dpi, the engraving speed is faster, you can try to use a large size lens for engraving. When laser engraving lead-containing crystals, you should be more careful. Lead-containing crystals have different expansion coefficients from ordinary crystals. This may cause crystals to crack or break during engraving. A smaller power setting can avoid this problem, but you should always guard against breakage. After engraving, the surface can be cleaned with a damp cloth, and can be colored with acrylic pigments. Laser cutting machine | Laser marking machine | Laser engraving machine | Fiber laser marking machine | Laser equipment manufacturer-Dongguan Heli Laser Equipment Co., Ltd.!
This article is divided into 1 pages
share to:
Previous: Laser engraving laser marking machine
Next: Look at how to maintain the laser cutting machine
related articles:
    No Information