contact details

Anshan Heli Laser Equipment Co., Ltd.

National Service Hotline : 400-641-6888

Address: No. 368 Qianshan Road, High-tech Zone, Anshan City

Dongguan Heli Laser Equipment Co., Ltd.

Address: No. 48 Wenxiang Road, Xiaoxiang, Wanjiang District, Dongguan City, Guangdong Province

Phone: 0769-88879968

0769-21661919

Fax: 0769-21665152

Contact: Mr. Yang

Mobile: 13609678851

E-mail: info@afeweb.com

您的位置: 首页 - 公司动态 - 公司新闻 How to improve the efficiency and reduce the cost of fiber laser cutting machine becomes the concern of most users. Your location : 杏鑫平台 - Company News - Company News

How to improve the efficiency and reduce the cost of fiber laser cutting machine has become a concern for most users

Release time: 2019.10.16 News source: Laser cutting machine | Laser marking machine | Laser engraving machine | Fiber laser marking machine | Laser equipment manufacturer-Dongguan Heli Laser Equipment Co., Ltd. Browse times:
With the popularity of laser cutting equipment, competition in the laser processing industry is becoming increasingly fierce. How to improve efficiency and reduce costs has become a concern for most users. Today, we take 6000W laser cutting equipment and 12000W laser cutting equipment as examples, and calculate which laser equipment cost is lower from the aspects of processing cost and processing efficiency.

Processing cost

The following cost analysis is calculated according to the following configuration parameters:





It can be seen from the above data: Compared with the 6KW laser processing cost , the 12kW laser cutting cost can basically be reduced by more than half. Among them, stainless steel has the largest advantage, followed by carbon steel and aluminum. Air is used as an auxiliary gas when cutting stainless steel, and the unit price processing cost is the lowest, which can meet products with low requirements on cutting end faces.

Processing efficiency




From the test cutting speed, it is concluded that when cutting carbon steel, the 12kW laser cutting speed is 87% to 493% faster than the 6kW laser cutting speed; when cutting stainless steel, the 12kW laser cutting speed is faster than the 6kW laser cutting speed % —289%; When cutting aluminum, the cutting speed of 12kW laser cutting is 150% -213% faster than that of 6kW laser cutting.

Processing effect




Lasers used in the above tests:



to sum up:

From the perspective of overall economic benefits, the price of a 12kW laser cutting device is 30% -40% higher than that of a 6kW laser cutting device, but the production efficiency is more than several times that of a 6kW laser cutting device, and the processing cost is also higher than that of a 6kW laser cutting device. The equipment is reduced by more than half, which greatly reduces the processing time and processing cost of a single workpiece, and the processing effect is more excellent, which can create the effect of doubling the value for users.

Of course, specific problems need to be analyzed in detail. Users need to purchase processing equipment and choose the processing method that suits them according to the actual needs of their enterprises.
This article is divided into 1 pages
share to:
Previous: The main points of laser fiber production technology mainly include preform technology
Next: At present, UV laser cutting machines are more commonly used for PCB cutting.